Moving The Device; Positioning; Connection To The Power Mains - TEXA KONFORT 700R Technical Manual

KONFORT 760R / 760R BUS / 780R BI-GAS
Proceed as follows:

9.2 Moving the Device

The equipment must be moved on its own wheels.
The device has been specifically researched and designed to lower the centre
of mass; to do so the heavier components have been placed on the bottom,
nonetheless it wasn't possible to completely eliminate the risk of overturning.
Follow the safety rules provided in this manual.
Proceed as follows:
1. Lock the refrigerant scale.
2. Unlock the wheels (if necessary) and push the cart using the specific handle
located on the back of the equipment.

9.3 Positioning

The device must be placed near the A/C system that must be checked; make
sure it is on a flat surface and in an appropriate environment, as specified in the
safety regulations within this manual.
Once the device has been positioned, we suggest locking the wheels with the
specific mechanical brakes the wheels are equipped with.
Position the equipment so that the main switch can be always
reached easily.

9.4 Connection to the Power Mains

The device must be connected to the mains via the specific supply cable
provided; respect the applicable voltage, frequency and power values.
50
1. Go to the front of the device.
2. Locate the scale locking / unlocking control.
• Locking the scale: push and turn the locking/
unlocking control counter-clockwise using the
specific wrench.
• Unlocking the scale: push and turn the
locking/unlocking control clockwise using the
specific wrench.