en
12 STOP
This chapter describes the operations required in order to stop the equipment.
12.1 Normal Stop
To stop the equipment, set the main switch to the O (OFF) position.
Do not disconnect the device from the power mains by unplugging
the power supply cable either from the device or from the socket.
12.2 Stopping the Equipment for Long Periods
Should you intend to stop the equipment for a long period of time, follow the
instructions below.
Proceed as follows:
1. Disconnect the equipment from the power mains.
2. Place the cover provided over the device.
3. Put the device in a safe place, not exposed to outside weather conditions.
59