Entering The Sd Card; How To Load The Paper Into The Printer - TEXA KONFORT 700R Technical Manual

The voltage, frequency, and power values that can be applied can be found on
the tag located near the main switch.
Proceed as follows:
1. Go to the left hand side of the device.
2. Connect the supply cable to the appropriate connector.
3. Connect the supply cable to the power mains via a socket connected to
ground.

9.5 Entering the SD CARD

The SD CARD contains the database of the vehicles on which it is possible to
carry out air conditioning service and allows you to automatically store each
recharging service carried out.
You must insert the SD CARD into the specific slot before use
Proceed as follows:
1. Locate the SD CARD slot.
2. Enter the SD CARD in the slot with the label facing upwards until you hear a
soft click.

9.6 How to Load the Paper into the Printer

780R stations are equipped with a serial thermal printer.
You must fill the printer with paper before use.
en
51