Eden The Huntington Raised Planter Bed Assembly Instructions

A S S E M B LY I N S T R U C T I O N S

The Huntington Raised Planter Bed

Please read through before starting assembly.

Check Box for These Contents

In the event of missing or defective parts please call our customer service

dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST).

1. Planter Bed Walls (8)

2. Stainless Steel Screws (12)

3. Washers (4)

• Cordless Screwdriver

• Read Instructions through carefully before beginning assembly.

• When assembling components, place on a non-abrasive surface

(i.e. shipping box) to avoid scratching.

• We recommend an area approx 5'x 8' for unobstructed assembling.

• You should not need to use excessive force when assembling component.

www.edenarbors.com

Not to Scale

Ver 1/NOV 2011

Table of Contents

Do you have a question about the The Huntington Raised Planter Bed and is the answer not in the manual?

Page 1 A S S E M B LY I N S T R U C T I O N S The Huntington Raised Planter Bed www.edenarbors.com ¤ ¢ £ ¡ ¢ £ ¤ ¢ £ ¡ ¢ £ ¥ ¢ £...
Page 2 S T E P O N E NOTE: The end caps are pre-glued. In the event that any of the end caps come off, simply use PVC or plumbing glue to re-attach them to the wall. Layout the bottom four walls of the planter bed into place as shown aside.