Advertisement
A S S E M B LY I N S T R U C T I O N S
The Versailles Raised Planter Bed
Please read through before starting assembly.
Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
1. Post with Post Caps attached (4)
2. Side Panels (8)
3. 3.5" Stainless Steel Screws (16)
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 4'x 8' for unobstructed assembling.
• You should not need to use excessive force when assembling components.
9 in.
12 in.
1
2
3
Not to Scale
24 in.
65.2 in.
56 in.
65 in.
www.edenarbors.com
65.2 in.
59 in.
59 in.
Ver 1/DEC 2010
1
Advertisement
Table of Contents
Related Manuals for Eden Versailles
Summary of Contents for Eden Versailles
- Page 1 A S S E M B LY I N S T R U C T I O N S The Versailles Raised Planter Bed www.edenarbors.com 65.2 in. 9 in. 24 in. 59 in. 12 in. 65.2 in. 59 in. 56 in.
- Page 2 The Versailles Raised Planter Bed S T E P O N E Raise Bed Installation 60½” 60½” Excavate four, 8-inch holes in a square pattern (60½” x60½”) as shown aside. Holes are to be 12 inches deep. 12” 8” Place a post into each of the four holes. The posts will be buried 12 Inches into the ground.
Need help?
Do you have a question about the Versailles and is the answer not in the manual?
Questions and answers