Table of Contents
Advertisement
D110P/D110E on DAHDI User Manual
1.2 What is D110P/D110E
The D110P/D110E supports E1, T1 and J1 environments. It is selectable
on a per-card or per-port basis. This feature enables signaling translation
between E1 and T1 equipments and allows inexpensive T1 channel banks
to connect with E1 circuits.
D110P/D110E supports industry standard telephony and data protocols,
including Primary Rate ISDN (both N. American and Standard Euro)
protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data
modes. Both line-side and trunk-side interfaces are supported.
D110P/D110E works well with Asterisk®, Elastix®, FreeSWITCH™,
PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as
other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway
applications.
Target Applications
Voice-over Internet Protocol (VoIP) Services
Complex IVR Trees
"Meet-Me" Bridge Conferencing
VoIP Gateways (support SIP, H.323, and IAX)
Legacy PBX/IVR Services
Voice/Data Router (replace expensive routers)
PRI/Switch Compatibility - Network or CPE
7
OpenVox Communication Co. LTD.
URL: www.openvox.cn
http://ArtTel.ru
Advertisement
Table of Contents
