Table of Contents
Advertisement
2. Country mode modification
In order to match your country pattern, you need to change parameters
loadzone and defaultzone to your country. For example, your system is in
CHINA, you would like them change to:
loadzone = cn
defaultzone = cn
/etc/asterisk/indications.conf.
country=cn
A part of file /etc/asterisk/dahdi-channels.conf is showed as below.
(Modification, if it is not agree with the hardware setup)
; Span 1: WCT1/0 "Digium Wildcard TE110P
T1/E1 Card 0" (MASTER)
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63
OpenVox Communication Co. LTD.
http://ArtTel.ru
Some zonedata is available in the file
.. /dahdi-XX/tools/zonedata.c, you can refer to it to match
your country mode. Meanwhile, you also need to modify
another parameter which is in file
Figure 5 A part of dahdi-channels.conf
D110P/D110E on DAHDI User Manual
URL: www.openvox.cn
17
Advertisement
Table of Contents
