Table of Contents
Advertisement
D110P/D110E. If it has been recognized, "communication controller"
will be displayed in the output information like that:
01:02.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Stepping- SERR- FastB2B-
<MAbort- >SERR- <PERR-
,D2+,D3hot+,D3cold+)
If D110P/D110E is not recognized by the system, you have to power off
and take out the card, then try to insert it into other PCI or PCI-E slot.
2. Software installation
Some dependencies are crucial. If any of them is absent, the software
installation process would not go through successfully. Let's run "yum
install XX" (XX stands for the dependency's name) to check the
availability of dependencies.
# yum install bison
# yum install bison-devel
# yum install ncurses
OpenVox Communication Co. LTD.
http://ArtTel.ru
Subsystem: Unknown device 79de:0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
Latency: 64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 225
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at dcdff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Figure 3 Hardware detection
D110P/D110E on DAHDI User Manual
URL: www.openvox.cn
12
Advertisement
Table of Contents
