Advertisement
Quick Links
Advertisement
Related Manuals for Thor’s Drone World LIFTHOR SC PRO ENTERPRISE COMBO
Summary of Contents for Thor’s Drone World LIFTHOR SC PRO ENTERPRISE COMBO
- Page 1 by Thor’s Drone World User’s Manual...
- Page 2 Congratulations on your new Utility mount for DJI Smart Controller ENTERPRISE...
- Page 3 Content: Tablet clamp Compatible with 7.9” up to 13” devices COMBO Tablet Utility Mount Mount Screwdriver Screws Hex Key HDMI Cable...
- Page 4 Tablet Mount - Tablet Mount - Tablet Clamp - 4x Screws (M2.5 x 8) - Screwdriver - Hex Key (Allen Key) - 3x USB 2.0 ConnecThor Cables (Lightning / Type C / Micro USB)
- Page 5 Utility Mount - Utility Mount - 4x Screws (M2.5 x 8) - 1x Screw (1/4”-20 x 3/8”) - Screwdriver - Hex Key (Allen Key) - HDMI ConnecThor Cables...
- Page 6 How to assemble: Utility Mount Remove the protective sticker from your Smart Controller to accesses the screw points...
- Page 7 Align the mount with your Smart Controller to secure it in place with the (4x) screws provided .
- Page 8 To have better access of the rear screws adjust the angle of the top bracket...
- Page 9 Now your utility mount is properly installed!
- Page 10 To install an HDMI Monitor, adjust the top bracket to have easy access to align it with the monitor’s mounting point . With the screw provided and the use of the hex key (Allen key) secure it in place...
- Page 11 Adjust the position of the monitor, accordingly , use the hex key to tighten it in place. You can use a small wrench tool #8 (not provided) to give it an extra tight.
- Page 12 Connect your monitor with the HDMI ConnecThor Cable included - to your DJI Smart Controller.
- Page 13 There you go, now you are ready for takeoff.
- Page 14 How to assemble: Tablet Mount...
- Page 15 Align the mount with your Smart Controller to secure it in place with the (4x) screws provided .
- Page 16 Unscrew the tightening ring from the back of the Tablet Clamp and place it on the ball joint tightening ring...
- Page 17 Attach the clamp to the ball joint and screw the ring back to secure the clamp position / angle. tightening ring...
- Page 18 The clamp has two mechanisms to ensure your tablet sit secure Lock and in place. The first mechanism is the ratchet part, to adjust to the size of your tablet. We recommend setting it a little smaller (1” / 2.5cm) than the actual size of the tablet for a tighter, secure fit.
- Page 19 Place the tablet in landscape mode by pulling the spring mechanism upwards and release it to secure the tablet in place. You can adjust the top clamp tabs, if needed, to avoid pressing on any buttons *Scan the QR code with your phone for a video tutorial...
- Page 20 Scan the QR code, by opening the camera app on your smart phone or tablet device. Point your camera at the QR code. Tap the banner that appears on your device to open the tutorial video in YouTube...
- Page 21 Compatible with most small tablets like iPad Mini or similar up to larger tablets like the iPad Pro 12.9” and everything in between...
- Page 22 www.lifthor.com...
Need help?
Do you have a question about the LIFTHOR SC PRO ENTERPRISE COMBO and is the answer not in the manual?
Questions and answers