Advertisement
Quick Links
Advertisement
Related Manuals for Thor’s Drone World LIFTHOR SC PRO ENTERPRISE
Summary of Contents for Thor’s Drone World LIFTHOR SC PRO ENTERPRISE
- Page 1 Utility mount for DJI SC PRO ENTERPRISE / MATRICE 300 by Thor’s Drone World User’s Manual...
- Page 2 Congratulations on your new Utility mount for DJI Smart Controller ENTERPRISE / MATRICE 300...
- Page 3 Content: Tablet clamp Compatible with 7.9” up to 13” devices (3x)USB 2.0 Utility ConnecThor Cables Mount -Lightning -Micro USB Tripod Knob -Type C (¼”-20 ½”) Hex Key / Allen Key 4x Screws (M2.5 x 8) Screwdriver Wrench HDMI Cable...
-
Page 4: How To Assemble
How to assemble: Remove the protective sticker from your Smart Controller to accesses the screw points... - Page 5 Align the mount with your Smart Controller to secure it in place with the (4x) screws provided. Make sure to place all 4 screws before tightening them properly...
- Page 6 To have better access of the rear screws loosen up the top part of the utility mount with the hex key and wrench provided. Remember to tighten it back to lock its position once you have mounted the Monitor / Tablet...
- Page 7 Now your utility mount is properly installed!
- Page 8 Use the provided tripod knob to secure a monitor in place* by threading the knob through the middle hole of the top plate. We recommend the use of a quick release bracket for convenience. - sold separately...
- Page 9 OR mount the tablet clamp to use in conjunction with a tablet by tightening the tripod knob through the middle hole on the top plate to secure it in place* *If needed use a 6mm washer...
- Page 10 The clamp has two mechanisms to ensure Lock your tablet sit secure and in place. The first mechanism is the ratchet part, to adjust to the size of your tablet. We recommend setting it a little smaller (1” / 2.5cm) than the actual size of the tablet for a tighter, secure fit.
- Page 11 Place the tablet in landscape mode by pulling the spring mechanism upwards and release it to secure the tablet in place. You can adjust the top clamp tabs, if needed, to avoid pressing on any buttons *Scan the QR code with your phone for a video tutorial...
- Page 12 Scan the QR code, by opening the camera app on your smart phone or tablet device. Point your camera at the QR code. Tap the banner that appears on your device to open the tutorial video in YouTube...
- Page 13 The tablet clamp is compatible with most small tablets like iPad Mini or similar up to larger tablets like the iPad Pro 12.9” and everything in between...
- Page 14 www.lifthor.com...