Related Manuals for PRx Performance Build Limitless Full Cage-95
Summary of Contents for PRx Performance Build Limitless Full Cage-95
- Page 1 Build Limitless Full Cage Rack ® Build Limitless Full Cage Rack support@prxperformance.com support@prxperformance.com 701-566-0452...
- Page 2 Models covered in these instructions Models Covered in These Instructions Full Cage-95 Full Cage-81 (701) 566-0452...
- Page 3 1-701-566-0452 LIMITED LIFETIME WARRANTY: This product is warranted by PRx Performance LLC, to the original user-owner only, against defective materials or workmanship for the lifetime of the product. During the warranty period, or “lifetime” of the product, at the discretion of PRx management, if the product is found to be defective, it will be repaired or replaced without charge.
- Page 4 Full Cage Exploded Assembly View Full Cage Exploded Assembly View (701) 566-0452...
- Page 5 Full Cage Assembly Instructions Start of Frame Assembly 1. First make sure all your components and hardware are accounted for, according to the Parts List on 1. Start with the back portion of the rack, making sure the logo is on the back side of the page 3.
- Page 6 Full Cage Rack Assembly Full Cage Assembly Instructions 1. Assemble the crossmembers that connect the back and front of the rack as shown below. 1. Assemble the crossmembers that connect the back and front of the rack. When attaching 2. A second person may be needed to hold the already assembled frame up while you attach the cross- members.
- Page 7 Full Cage Assembly Instructions 1. Once the crossmembers and uprights are assembled, attach the pull-up bar between the top of the two front uprights (Figure 7). Pull-Up Bar Assembly 2. Now that all components are assembled, make sure the spreader plate is flush to the floor 1.
Need help?
Do you have a question about the Build Limitless Full Cage-95 and is the answer not in the manual?
Questions and answers