Table of Contents
Advertisement
8: Advanced LAN Configuration
Overview
These screens and settings are provided to deal with non-standard situations, or to provide additional
options for advanced users.
Existing DHCP Server
If your LAN already has a DHCP Server, and you wish to continue using it, the following configuration
is required.
•
The DHCP Server function in The Load Balancer must be disabled. This setting is on the LAN &
DHCP screen.
•
Your DHCP Server must be configured to provide The Load Balancer's LAN IP address as the
"Default Gateway".
•
Your DHCP Server must provide correct DNS addresses to the PCs.
Routing
This section is only relevant if your LAN has other Routers or Gateways.
•
If you don't have other Routers or Gateways on your LAN, you can ignore the Static Routing
page completely.
•
If your LAN has other Gateways and Routers, you must configure the Static Routing screen as
described below. You also need to configure the other Routers.
Page 59
Advertisement
Table of Contents
Need help?
Do you have a question about the Edimax user guide Router and is the answer not in the manual?
Questions and answers