Outgoing Port Range
Incoming Protocol
Incoming Port Range
Buttons
Special Application
List
Using a Special Application on your PC
•
Once the Special Applications screen is configured correctly, you can use the application on your
PC normally. Remember that only one (1) PC can use each Special application at any time.
•
Also, when 1 PC is finished using a particular Special Application, there may need to be a "Time-
out" period before another PC can use the same Special Application.
•
If an application still cannot function correctly, try using the "DMZ" feature, if possible.
Enter the beginning and end of the range of port numbers used by the
application server, for data you send. If the application uses a single
port number, enter it in both fields.
Select the protocol used by this application, when receiving data from
the remote server or PC.
Enter the beginning and end of the range of port numbers used by the
application server, for data you receive. If the application uses a single
port number, enter it in both fields.
•
Add – Create a new Special Application entry.
•
Delete – Delete the selected entry.
•
Update – Save any changes you have made to the current entry.
•
Cancel – Cancel any changes you have made since the last save
operation.
This shows details of all Special Applications which are currently
defined.
Page 33
Need help?
Do you have a question about the Edimax user guide Router and is the answer not in the manual?
Questions and answers