Email Alert - Edimax user guide Router User Manual

Settings – SNMP
•
System
Information
•
•
Trap Targets Enter the IP address of any targets (PCs running SNMP software) to which you
want traps to be sent. All traps are level 1.

Email Alert

This feature will send an warning Email, inform system administrator that one of the WAN ports was
disconnected.
Email Alert – You can choose to enable or disable it to send a warning email.
Email Sender Address – It is an email address which will send the warning email.
Email (SMTP) Server Address – It is an email server address the warning email will be sent to.
Email Recipient Address – It is an email address of system administrator the email will be sent to.
Contact Person – The name of the person responsible for this device.
Device name – The name of The Load Balancer.
Physical Location – The location of The Load Balancer.
Figure 7-2: Email Alert
Page 53