6: Qos Configuration; Overview; Qos Setup - Edimax user guide Router User Manual

6: QoS Configuration

Overview

The Load Balancer provides QoS, which supports the high quality of network service.
Because it will classify outgoing packets based on some policies defined by users, make some
real-time applications to get better response or performance.

QoS Setup

The following web page management are guiding you how to setup QoS and make QoS work.
Data – QoS Setup.
QoS Feature
•
•
IP TOS ( Type
of Service)
Feature
•
Figure 6-1:QoS Setup
Enable QoS – This will allow users enable QoS function.
Queuing Method – The methods that how you manage your queue." Priority
queuing". It is one of the first queuing variations to be wildly implemented.
Process TOS Field –An 8 bits field in the IP packet header designed to
contain values indicating how each packet should be handled in the network.
If you choose "enable" then it will enable this function to process IP Type of
Service field.
Overwrite policy priority – Choose "yes" to set the priority of TOS field in IP
packet overwrite the priority defined in policy configuration
Page 50