Edimax user guide Router User Manual page 51

Block Well-known
ports
User-defined Ports to
Block
Select the services you wish to block. The current group will not be able
to use any services which are checked.
This section is optional. It allows you to define your own filters if
required. For each filter, the following information is required.
•
Name – Enter a meaningful name for this filter.
•
TPC/UDP Packets – Select either TCP or UDP, depending on
which protocol is used by the service you wish to block.
•
Port No. Range – Enter the range of port numbers used by the
service you wish to block. If only a single port is required, enter it in
both fields.
Page 47