fantastic furniture Bridge Dining Table Manual page 11

4 x Bolts(60x45mm) 4 x Washers
(H2)
(H1)
1 x Allen Key
(H3)
Align seat (P2) with holes in Metal Frame (P1). Attach seat(P2) to Metal Frame(P1)
with 4xBolts(H1) and 4xWashers(H2).You may need to apply downward pressure to
get the bolts to catch.Once all bolts are hand-tightened,use Allen Key(H3) to
tighten firmly.
Note: To make it is easier,
place the frame over a table