RADAR TRAINING SYSTEM
MODEL 8096
Model 9604 – Radar Antenna (cont'd)
Polarization
Physical Characteristics
Model 9604-A – Dual Feed Parabolic Antenna
Crossover Level of Antenna Beams (at 6 m)
Antenna beam Squint (at 6 m)
Physical Characteristics
Model 9605 – Dual-Channel Sampler
I-, Q-Channel Input Voltage Range
Pulse Input Impedance
Trigger Inputs
Range
A-Scope Time-Base Output Level
Physical characteristics
Model 9607 – Target Positioning System
Power Requirement
Target Table
Target Controller
Physical Characteristics
Model 9608 – Radar Jamming Pod Trainer
Frequency Range
Output Power
Internal Frequency Modulation
Frequency Modulation Input
Internal Amplitude Modulation
Amplitude Modulation Input (on-off modulation)
Auxiliary RF Output
30
Dimensions (H x W x D)
Net Weight
Dimensions (H x W x D)
Net Weight
Dimensions (H x W x D)
Net Weight
Current
Positioning Accuracy
Speed Range
Programmed Trajectories
External Voltage Range
External Input Impedance
Dimensions (H x W x D)
Net Weight
Waveform
Deviation
Voltage Range
Modulating Frequency Range
Impedance
Type
Frequency
Level
Delay Time / Transition Time
Frequency Range
Output Power
Impedance
Linear, vertical
425 x 375 x 515 mm (16.8 x 14.8 x 20.3 in)
1.5 kg (3.3 lb)
3.2 dB (typical)
±3.2E (typical)
425 x 375 x 515 mm (16.8 x 14.8 x 20.3 in)
1.9 kg (4.2 lb)
-1 V to +1 V
50 Ω
TTL
Selectable, 1.8, 3.6, and 7.2 m (5.9, 11.8, and 23.6 ft)
2 V
112 x 330 x 300 mm (4.4 x 13 x 11.4 in)
3.6 kg (7.9 lb)
120 V – 50/60 Hz
220 V – 50 Hz
2 A
±0.5 cm (±0.2 in)
0 to 30 cm/s (0 to 11.8 in/s)
4
-5 to +5 V
10 kΩ
950 x 1325 x 1220 mm (37.4 x 52.2 x 48 in)
100 kg (220 lb)
8 to 12 GHz
!30 to +10 dBm, adjustable in 1 dB steps
Selectable, 980-Hz synthesized triangular wave or 30-kbps pseudo-
random bit sequence
Selectable, 50 MHz, 1, 2, 3, and 4 GHz
!10 to +10 V (to cover 8 to 12 GHz)
DC to 130 kHz
10 kΩ
On-Off
Selectable, 0.25, 0.5, 1, 2, 3, 4 , 5 , 140, 141, 142, 143, 144, 145,
146, 147, and 148 Hz
TTL
150 ns / 50 ns
8 to 12 GHz
!30 to +10 dBm, adjustable in 1 dB steps
50 Ω
240 V – 50 Hz
0.8 A
Need help?
Do you have a question about the 8096 and is the answer not in the manual?