Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc.
1. Introduction The J-Tech Digital JTECH-8KSW02 8K 2 Input HDMI 2.1 Switch with dual outputs can not only switch between the two HDMI 2.1 input signals, but can also distribute the signal to two displays simultaneously. The JTECH- 8KSW02 supports video resolutions up to 8K@60Hz 4:2:0. Able to be used...
5. Operation Controls and Functions Front Panel Rear Panel Name Function Description POWER LED When the device is powered on, the red LED will be on. When the HDMI IN 1/2 port connects to an active IN LED source device, the corresponding green LED will (1-2) illuminate.
Page 6
Note: When the device is powered on both OUT1 and OUT2 will default to output the source signal from the IN1 port. The device supports memory function in case of power-down. AUTO SWITCH: When there is no input signal, empty switching is allowed; when an input signal detected, the device will switch to the last source signal automatically.