Table of Contents
Advertisement
INSTALLATION
BUILT-IN APPLIANCES
•
The appliance is only intended for installation in a kitchen.
•
This appliance is not intended for use as a table appliance or inside a cabinet.
•
The built-in cabinet may not have a rear panel behind the unit.
•
A distance of at least 35 mm must be maintained between the wall and the rear wall or the floor
of the appliance located above it.
•
The built-in cabinet must have a ventilation opening of 200 cm
the base plate must be cut back or a ventilation grille must be fitted.
•
The ventilation slots and air intake openings must not be covered.
•
Safe operation of this appliance can only be guaranteed if it has been installed in accordance
with these installation instructions.
•
The installer is liable for all damage caused by improper installation.
•
The cabinets in which the appliance is installed must be sufficiently heat-resistant.
INSTALLATION DIMENSIONS
Ventilation openings
at the rear, at least
2
200 cm
Back open
Ventilation area
underneath the
cabinet min. 200 cm
2
Ventilation grille Cabinet feet
2
at the front. For this purpose,
Ventilation area
underneath the
cabinet min. 200 cm
7
Back open
2
Advertisement
Table of Contents
