Saving Configuration - Draytek VIGORFLY 200 User Manual

IP Address
TX Packets
RX Packets
WAN Status
IP
GW IP
Mode
Up Time
Primary DNS
Secondary DNS
TX Packets
TX Rate
RX Packets
RX Rate
Note: The words in green mean that the WAN connection of that interface is ready for
accessing Internet; the words in red mean that the WAN connection of that interface is not
ready for accessing Internet.
2 . 6 S a v i n g C o
2 . 6 S a v i n g C o
Each time you click OK on the web page for saving the configuration, you can find messages
showing the system interaction with you.
Ready indicates the system is ready for you to input settings.
Settings Saved means your settings are saved once you click Finish or OK button.
VigorFly 200 Series User's Guide
n f i g u r a t i o n
n f i g u r a t i o n
Displays the IP address of the LAN interface.
Displays the total transmitted packets at the LAN interface.
Displays the total number of received packets at the LAN
interface.
Displays the IP address of the WAN interface.
Displays the IP address of the default gateway.
Displays the type of WAN connection (e.g., PPPoE).
Displays the total uptime of the interface.
Displays the primary DNS setting.
Displays the secondary DNS setting.
Displays the total transmitted packets at the WAN interface.
Displays the speed of transmitted octets at the WAN
interface.
Displays the total number of received packets at the WAN
interface.
Displays the speed of received octets at the WAN interface.
27