Table of Contents
Advertisement
Server IP
User Name
Password
Address Mode
IP Address
Subnet Mask
Default Gateway
Redial Policy
MAC Address Clone
Type in the IP address of the PPTP/L2TP server.
Type in the username provided by ISP in this field.
Type in the password provided by ISP in this field.
You can choose Static IP or DHCP as WAN IP network
setting.
Type the IP address if you choose Static IP as the WAN IP
network setting.
Type the subnet mask if you chose Static IP as the WAN IP.
Type the gateway address for this router.
If you want to connect to Internet all the time, you can
choose Always On. Otherwise, choose Connect on
Demand.
Idle Time - Set the timeout for breaking down the Internet
after passing through the time without any action. When you
choose Connect on Demand, you have to type value here.
MAC Address Clone is available when the box of Enable is
checked. The router will detect the MAC address
automatically. The result will be displayed in the field of
MAC Address.
72
VigorFly 200 Series User's Guide
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VIGORFLY 200 and is the answer not in the manual?
Questions and answers