Draytek VIGORFLY 200 User Manual page 48

Subnet Mask
For IP Routing Usage
nd
2 IP Address
nd
2 Subnet Mask
PPPoE Passthrough
DHCP Server
Configuration
Enable Server
Disable Server
Start IP Address
End IP Address
Subnet Mask
Default Gateway
Lease Time
DNS Manual Setting
Primary DNS Address
Secondary DNS Address
network (Default: 192.168.1.1).
Type in an address code that determines the size of the
network. (Default: 255.255.255.0)
Click Enable to invoke this function. The default setting is
Disable.
Type in secondary IP address for connecting to a subnet.
(Default: 192.168.2.1)
An address code that determines the size of the network.
If you want to use PPPoE server in the network via Vigor
router, please check this box to redirect the PPPoE frames
to the specified location.
DHCP stands for Dynamic Host Configuration Protocol.
The router by factory default acts a DHCP server for your
network so it automatically dispatch related IP settings to
any local user configured as a DHCP client. It is highly
recommended that you leave the router enabled as a DHCP
server if you do not have a DHCP server for your network.
If you want to use another DHCP server in the network
other than the Vigor Router's, you can let Relay Agent help
you to redirect the DHCP request to the specified location.
Let the router assign IP address to every host in the LAN.
Let you manually assign IP address to every host in the
LAN.
Enter a value of the IP address pool for the DHCP server to
start with when issuing IP addresses. If the 1st IP address
of your router is 192.168.1.1, the starting IP address must
be 192.168.1.2 or greater, but smaller than 192.168.1.254.
Enter a value of the IP address pool for the DHCP server to
end with when issuing IP addresses.
Type in an address code that determines the size of the
network. (Default: 255.255.255.0/ 24)
Enter a value of the gateway IP address for the DHCP
server. The value is usually as same as the 1st IP address of
the router, which means the router is the default gateway.
It allows you to set the leased time for the specified PC.
If this function is enabled, LAN PCs use Primary DNS
Server and Secondary DNS Server as their DNS servers.
Otherwise, LAN PCs use the router as their DNS server
and the router will do DNS proxy for them.
You must specify a DNS server IP address here because
your ISP should provide you with usually more than one
DNS Server. If your ISP does not provide it, the router will
automatically apply default DNS Server IP address:
194.109.6.66 to this field.
You can specify secondary DNS server IP address here
because your ISP often provides you more than one DNS
Server. If your ISP does not provide it, the router will
40
VigorFly 200 Series User's Guide