Table of Contents
Advertisement
D
H
C
P
D
H
C
P
It is not necessary for you to type any IP address manually. Simply choose this type and the
system will obtain the IP address automatically from DHCP server.
DHCP Mode
Enable
MAC Address Clone
After finishing the settings here, please click Next.
P
P
P
o
E
P
P
P
o
E
PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted
standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a
common broadband medium, such as a single DSL line, wireless device or cable modem. All
the users over the Ethernet can share a common connection.
PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection
for accessing the Internet. Your service provider will provide you information about user name,
password, and authentication mode.
VigorFly 200 Series User's Guide
Router Name – Default setting is VigorFly200.
The router will detect the MAC address automatically. Or,
check the box to enable MAC address cloning.
It is available when the box of Enabled is checked. Click
MAC Address Clone. The router will detect the MAC
address automatically. And the result will be displayed in the
field of MAC Address.
Besides, if you want to change the MAC address for WAN
interface, simply click Enable and type the MAC address in
this field manually.
15
Hide quick links:
Advertisement
Table of Contents
