Led Indicators And Connectors - Draytek VIGORFLY 200 User Manual

1 . 2 L E D I n d i c
1 . 2 L E D I n d i c
Before you use the Vigor router, please get acquainted with the LED indicators and connectors
first.
a t o r s a n d C o n
a t o r s a n d C o n
LED
ACT
USB
WAN
LAN 1 - 4
WLAN
(Green
LED) on
WLAN
button
WPS
(Orange
LED) on
WLAN
button
WPS Button
Interface
WAN
LAN (1-4)
USB
n e c t o r s
n e c t o r s
Status
Off
Blinking
On
Blinking
On
Blinking
On
Off
Blinking
On
Off
Blinking
(Green)
Off
Blinking
(Orange)
Blinking
(Orange)
Press this button for 2 seconds to wait for client
device making network connection through WPS.
When the orange LED lights up, the WPS will be
on.
Description
Connector for accessing the Internet.
Connectors for local networked devices.
Connector for USB storage device (Pen
Driver/Mobile HD) or printer or 3G backup.
Restore the default settings. Usage: Turn on the
router. Press the button and keep for more than 10
seconds. Then the router will restart with the
factory default configuration.
ON/OFF: Power switch.
PWR: Connecter for a power adapter.
2
Explanation
The system is not ready or is failed.
The system is ready and can work
normally.
A USB device is connected and active.
The data is transmitting.
The WAN port is connected.
It will blink while transmitting data.
A normal connection is through its
corresponding port.
LAN is disconnected.
Data is transmitting
(sending/receiving).
Wireless access point is ready.
Wireless access point is not ready.
Blink when wireless traffic goes
through.
The WPS is off.
Blink with 1 second cycle for 2
minutes - - WPS is enabled and waiting
for wireless client to connect with it.
Blink when wireless traffic goes
through.
VigorFly 200 Series User's Guide