Timer Function - Hanseatic MC-IF7222H1CC User Manual

Page EN-18

Timer function

Timer function
You can use the timer function as a timer or a
cooking time limiter for one or more cooking
areas.
The maximum timer setting is 99 min-
utes.
Use as a timer
The timer only functions while the appli-
ance is switched on. If the appliance
switches off automatically when idle, the tim-
er settings will be lost and the alarm will not
go off.
Setting the alarm time
Example: You want to set an alarm for 25
minutes.
00
ϱ ^
u
(9)
1. Touch the timer sensor (9).
0 00
ϱ ^
u
(9)
The " " on the units position will begin to
0
flash.
05 0
ϱ ^
u
(9) (14)
2. Use the slider sensor (14) to set it to "
3. Touch the timer sensor (9) once again.
05 05
ϱ ^
u
(9)
The " " on the tens digit will begin to flash.
0
25 25
ϱ ^
u
(9) (14)
4. Use the slider sensor (14) to set it to "
5. Touch the timer sensor (9) once again.
The display will stop flashing.
The time display counts down by the min-
ute.
An alarm will go off after the countdown
expires.
Changing the alarm time
1. Touch the timer sensor (9).
The remaining time will be shown; the dis-
play will flash.
2. Set the new alarm time, as described in
section "Setting the alarm time".
Stopping the countdown
1. Touch the timer sensor (9).
2. Change the alarm time to "
scribed in section "Changing the alarm
time".
The display will change to "
The countdown is interrupted.
Use as a cooking time limit
^ ϱ
u
To use the timer as a cooking time limit-
er, the appliance must be switched on
and the selected cooking area(s) must
be in operation.
^
ϱ
u
Setting the cooking time limit
00
^
ϱ
u
1. Tap the cooking area's display for which
you would like to set a cooking time limit.
".
5 The display will begin to flash.
00 00 0
^ ϱ
u
(9)
2. Touch the timer sensor (9).
The "
flash.
^
ϱ 3. Set the desired time, as described in
u
the section "Setting the alarm time"
page EN-18.
".
2
00
--
ϱ ^
4
ϱ ^
4
" on the units position will begin to
0
", as de-
".
^ ϱ
u
^
ϱ
u