Driving Module; Switching On The Driving Module; Battery Charging Socket - Meyra 1.623 Operationg Manual

DRIVING MODULE

Switching on the driving module

Do not move the driving lever (3)+(5) or
handlebar during the system test.
Press the ON/OFF key (1) to switch on the
driving module. The electronic system now
performs a system test.
☞ The electronic system is ready when
the battery gauge (2) is permanently lit.
☞ After about 20 seconds stillstand, the
system switches into stand-by-mode
and the LED for reversing the driving
direction (4) blinks.
– To exit the stand-by-mode, press
and release one of the driving levers
(3) or (5).

Battery charging socket

Do not insert other objects into the bat-
tery charging socket. – Danger of short
circuit!
To charge the batteries first switch off the
driving module. Then insert the plug of the
battery charger into the charging socket (6).
1 2
4
5
6
3
17