Paper And Other Media - FujiFilm Apeos C7070 Reference Manual

2.2

Paper and Other Media

After loading paper, configure the Paper Tray settings on the Home screen.
Refer
For details, refer to "Setup" in "Reference Guide - Operations".
The top face of loaded paper is the surface printed on.
1.
Pull out the Paper Tray until it stops.
2.
When paper is already loaded in the tray, take out the paper.
3.
If changing the Paper Size, adjust the guide position.
1)
Open the end guide (
in the back (
Tray.
2)
Insert the protrusions under the guide into the Paper Size
holes.
3)
Insert the Paper Tray protrusions into the Paper Size holes
on top of the guide and tighten the screw.
4
2 High Capacity Feeder B1
1 ), remove the screw for the guide
2 ), and remove the guide from the Paper
2
1