Print Area - FujiFilm ApeosPro C810 Reference Manual

No. Component
9 USB memory slot
(optional)
10 Fax One-touch
Button (optional)
2.2

Print Area

Image Loss Width (mm)
There is an unprintable area (image loss area) along all four edges of the paper.
The image loss widths are 4.0 mm at the lead edge, 4.0 mm at the trail edge, 3.0 mm at the top edge,
and 3.0 mm at the bottom edge.
Guaranteed Print Area (mm)
The following are the areas for which the image quality is guaranteed.
A3 or smaller
Larger than A3
Standard Printable Area (mm)
A3 or smaller
Larger than A3
Long paper
Extended Printable Area (mm)
Changing the printable area settings enables you to print over a margin (4.1 mm) for the standard
printable area.
A3 or smaller
Insert a USB memory device directly here.
Note
A memory card reader or a USB memory device cannot be
connected to the USB memory slot with a USB cable. Note that
the machine will not recognize the memory on a memory card
reader or a memory device connected to a USB interface
connector on the rear side of the machine when a USB memory
device is already inserted in the USB memory slot.
Allows you to specify a recipient with the simple press of a button. A
recipient can be specified for [Fax], [Internet fax], [Email], and
[Scan].
Area excluding an image loss area along all four edges
of the paper.
Copying Max: 297 x 432
Printing Max: 317 x 480
Area excluding a margin (4.1 mm) along all four edges
of the paper.
Standard size Max: 317 x 480
Custom Size Area excluding a margin (4.1 mm) along all four edges
of the paper.
Max: 323 x 1,292
Area excluding an image loss area along all four edges
of the paper.
Function
2.2 Print Area
9