Wolf CG Series Service Manual page 20

Remove All Knobs
Pull all of the knobs away from the unit.
Remove All Bezels
To remove each bezel:
1 Twist the bezel 90° counterclockwise.
2 Pull the bezel from the pan.
3 Disconnect the bezel from the light wire harness.
4 Remove the bezel from the unit.
Remove All Burner Assemblies
To remove each burner assembly:
1 Use a T-15 Torx bit to remove the screws holding the burner
assembly to the orifice holder.
2 Lift the burner assembly from the burner pan.
3 Remove the electrode wire from the igniter.
828386 REV. A 06/2018
CG Professional Gas Cooktop Service Manual
4 Remove the burner assembly from the unit.
Remove the Burner Pan
Lift the burner pan from the burner box.
Remove the Receptacle
1 Use a Phillips screwdriver to remove the mounting screws
from the receptacle.
2 Remove the receptacle from the unit.
19
service.subzero.com
Burner Cap
Burner Assembly
Igniter
Electrode Wire