Wolf CG Series Service Manual page 10

BURNER PAN REMOVAL
The burner pan is held to the burner box by the screws that
mount the burner assemblies to the orifice holder assemblies.
To remove the burner pan, first remove all burner grates and
burner caps. Uninstall the unit, and then remove the knobs,
bezels, and burner assemblies.
WARNING
Turn off the power and gas to the product before
starting this procedure.
CAUTION
The unit might be supported by the burner pan. The
unit must be uninstalled if more than one burner
assembly or the burner pan is being removed.
CAUTION
If the gas line is not long enough to stay connected
when the unit is pulled out of the opening, the gas
may need to be disconnected.
Remove All Burner Grates
Lift all burner grates from the unit.
828386 REV. A 06/2018
CG Professional Gas Cooktop Service Manual
Remove All Burner Caps
Remove all burner caps from the burner assemblies.
Uninstall the Unit
Remove the unit from the installation.
Remove All Knobs
Pull all of the knobs away from the unit.
Remove All Bezels
To remove each bezel:
1 Twist the bezel 90° counterclockwise.
2 Pull the bezel from the pan.
3 Disconnect the bezel from the light wire harness.
9
service.subzero.com