Table of Contents
Advertisement
CIRCUIT ID:
01/01/99
00:07:52
RESET PROVISIONING OPTIONS TO FACTORY DEFAULTS
This screen will allow you to reset the provisioning of
this HDSL circuit back to the factory defaults.
If you
do this, the options as shown on the provisioning screen
will change to the values that were programmed into this
unit from the factory.
After defaulting the options,
you can always make changes to the options from the
provisioning screen.
Press "D" to reset the provisioning options to factory defaults.
Press "M" to return to the Main Menu.
Figure 18. Default Options Screen
61246001L2-5B
Section 61246001L2-5, Issue 2
17
Advertisement
Table of Contents
Troubleshooting
