Figure 12. Provisioning Screen; Figure 13. Loopback Options Screen - ADTRAN HTU-C M R Installation And Maintenance Manual

CIRCUIT ID: Circuit XXXXX
CIRCUIT ID: Circuit XXXXX
61245001L6-5G
PROVISIONING
___________________________________________________
|
| PROVISIONS
| ------------------------------------------
| * DSX-1 LINE BUILDOUT
| DS1 OUTPUT LEVEL
| * DSX-1/DS1 LINE CODE
| DSX-1 FRAMING
| DS1 FRAMING
| * LOOPBACK TIMEOUT
| * CUSTOMER LOSS RESPONSE
| * LATCHING LOOPBACK MODE
|
|___________________________________________________|
Provisions marked with an asterisk (*) can be changed
using switches on the HTU-C.
set automatically based on the received T1 framing.
DS1 output level can be changed using a strap on the
circuit board of the HTU-R.
Press "M" to return to the Main Menu

Figure 12. Provisioning Screen

LOOPBACK OPTIONS
_____
|HTU-C|
| | LP1
--->|-----|<============>|-----|<============>|-----|<---
| |
NET | |
| | LP2
<---|-----|<============>|-----|<============>|-----|--->
| |
|_____|
1) LOOPBACK TO NETWORK
2) LOOPBACK TO CUSTOMER AT HTU-C = INACTIVE
3) LOOPBACK TO NETWORK
4) LOOPBACK TO CUSTOMER AT HTU-R = INACTIVE
5) LOOPBACK TO NETWORK
6) LOOPBACK TO CUSTOMER AT HRE-1 = INACTIVE
Press corresponding number to toggle loopback option.
Press "M" to return to the Main Menu

Figure 13. Loopback Options Screen

Section 61245001L6-5, Issue 7
SETTINGS
= 0-133 FEET
= 0 dB
= B8ZS
= ESF
= ESF
= NONE
= CDI
= T1
DSX-1 and DS1 framing are
_____ _____
|HRE 1| |HTU-R|
| | LP1 |
| | |
| | |
| | LP2 |
| | |
|_____| |_____|
AT HTU-C = INACTIVE
AT HTU-R = INACTIVE
AT HRE-1 = INACTIVE
02/01/99 11:18:17
|
|
|
|
|
|
|
|
|
|
|
|
02/01/99 11:17:30
|
|
| CUST
|
|
13