ADTRAN 3060 Installation And Maintenance Manual
ADTRAN 3060 Installation And Maintenance Manual

ADTRAN 3060 Installation And Maintenance Manual

High-bit-rate digital subscriber line transceiver unit for the central office

Advertisement

Quick Links

CONTENTS
1.
GENERAL ............................................................................ 1
2.
INSTALLATION .................................................................. 2
3.
OPERATION ........................................................................ 3
4.
HDSL SYSTEM TESTING .................................................. 4
5.
SCU CONTROL PORT OPERATION (HDSL) ................. 5
6.
HDSL DEPLOYMENT GUIDELINES ............................. 17
7.
MAINTENANCE ............................................................... 17
8.
PRODUCT SPECIFICATIONS ......................................... 17
9.
WARRANTY AND CUSTOMER SERVICE ................... 17
Appendix A.
HDSL H-LSS Circuit Configuration and Turnup
for G.703 Fed Systems .................................... A-1
Appendix B.
HDSL H-LSS Circuit Configuration and Turnup
for DS3-Fed Systems ...................................... B-1
FIGURES
Figure 1.
ADTRAN Total Access 3010 LTU ........................... 1
Figure 2.
LTU Edge Connector Wiring .................................... 2
Figure 3.
LTU Span Powering Diagram ................................... 4
Figure 4.
HDSL Loopbacks ...................................................... 5
Figure 5.
RS-232 (DB-9) Pin Assignments .............................. 5
Figure 6.
Logon Screen ............................................................. 7
Figure 7.
Total Access Screen ................................................... 7
Figure 8.
Access Module Menus Screen ................................... 8
Figure 9.
HDSL Main Menu Screen ......................................... 9
Figure 10. Configuration Screen ................................................. 9
Figure 11. Provisioning Screen ................................................. 10
Figure 12. Network Source Screen ........................................... 10
Figure 13. Status Screen ............................................................ 11
Figure 14. REG #1 Status Screen .............................................. 11
Figure 15. Alarms Screen .......................................................... 12
Figure 16. Test Screen ............................................................... 13
Figure 17. Performance History Screen .................................... 13
Figure 18. Protection Configuration Screen – Main ................ 14
Figure 19. Protection Configuration Screen – Auxiliary ......... 14
Figure 20. Set Circuit ID Screen ............................................... 16
Figure 21. Alarm Option Screen ............................................... 17
TABLES
Table 1.
Faceplate LED Indicators .......................................... 3
Table 3.
LP1 and LP2 Guidellines ......................................... 12
Table 4.
Protection Configuration Option Settings ............... 15
Table 5.
Total Access 3010 LTU Specifications ................... 18
Table B-1. Faceplate LED Indicator ....................................... B-2
1. GENERAL
Figure 1
61182007L1-5A
Total Access
High-bit-rate Digital Subscriber Line
Transceiver Unit for the Central Office

Installation and Maintenance

Trademarks: Any brand names and product names included in this document are
Section 61182007L1-5, Issue 1
trademarks, registered trademarks, or trade names of their respective holders.
®
3010 LTU
Figure 1. ADTRAN Total Access 3010 LTU
Section 61182007L1-5A
Issue 1, June 2001
LTU
PWR
G703
TST
LP1
LP2
ALM
TX
E
Q
RX
TX
M
O
N
RX
ACT
A
P
S
GRN = NORM
YEL = MAN
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3060 and is the answer not in the manual?

Questions and answers

Summary of Contents for ADTRAN 3060

  • Page 1: Installation And Maintenance

    Appendix B. HDSL H-LSS Circuit Configuration and Turnup for DS3-Fed Systems ... B-1 FIGURES Figure 1. ADTRAN Total Access 3010 LTU ... 1 Figure 2. LTU Edge Connector Wiring ... 2 Figure 3. LTU Span Powering Diagram ... 4 Figure 4.
  • Page 2: Revision History

    P2, Row A - 48 Volt return Figure 2. LTU Edge Connector Wiring REVISION HISTORY 2. INSTALLATION Service. Figure 2 P2, Row B Chassis ground Chassis ground HDSL Loop 2 Ring (facility) Fuse alarm Receive G.703 Ring backup connection Transmit G.703 Ring backup connection Receive G.703 Ring normal connection Transmit G.703 Ring normal connection - 48 Volt return...
  • Page 3: Table 1. Faceplate Led Indicators

    3. OPERATION Powering Options LTU Alarm Outputs Front Panel Operation Using the Total Access 3010 SCU (P/N 1181017L1) 61182007L1-5A Faceplate Indicators Table 1. Faceplate LED Indicators , t n , t n i s - i t c i t a i l a i l a i l a...
  • Page 4: Hdsl System Testing

    Status Mode E1 Core Frame Mapping 4. HDSL SYSTEM TESTING LTU G.703 Bantam Jack Figure 3 HDSL Loopbacks Figure 4 G.703 G.703 G.703 G.703 Figure 3. LTU Span Powering Diagram NTU Local Loopback NTU Remote Loopback LTU Local Loopback LTU Remote Loopback Section 61182007L1-5, Issue 1 HDSL HDSL...
  • Page 5: Figure 5. Rs-232 (Db-9) Pin Assignments

    LTU Network-Side Loopback LOCAL G.703 LOOP NTU Network-Side Loopback LOCAL G.703 LOOP NTU Customer-Side Loopback LOCAL LOOP LTU Customer-Side Loopback LOCAL LOOP LTU and NTU Bilateral Loopback LOCAL G.703 LOOP REG Network-Side Loopback G.703 Dual REG Network-Side Loopback G.703 X = Signal Inactive Figure 4.
  • Page 6 Menus Table 2 Table 2. Screen Abbreviations l i a i l a t a i i l a i t a i s r c i l i t a l a i t f i i t i t a t t i l e l l...
  • Page 7: Figure 7. Total Access Screen

    Figure 6 helf: Unacknowledged Alarms: ‘?’ - System Help Screen Shelf: Unacknowledged Alarms: 61182007L1-5A Total Access System MAJOR MINOR INFO Total Access System Account Name: Figure 6. Logon Screen Total Access System MAJOR MINOR INFO Total Access System Controller Common A - [DS3MX] Common B - [DS3MX] Access Modules System Alarms...
  • Page 8: Figure 8. Access Module Menus Screen

    Shelf: Unacknowledged Alarms: 1 - LTU... [Major] 2 - ... [None] 3 - ... [None] 4 - ... [None] 5 - ... [None] 6 - ... [None] 7 - ... [None] 8 - ... [None] 9 - ... [None] 10 - ... [None] 11 - ...
  • Page 9: Figure 10. Configuration Screen

    Figure 9 Shelf: Slot: Unacknowledged Alarms: Circuit ID: Shelf: Slot: Unacknowledged Alarms: Circuit ID: Unit Name Part Number Serial Number Product Revision Software Revision Manufacture Date Unit Name Serial Number Product Revision Manufacture Date 61182007L1-5A Total Access System MAJOR MINOR HDSL Line Termination Unit Configuration Provisioning...
  • Page 10: Figure 12. Network Source Screen

    Shelf: Slot: Unacknowledged Alarms: Circuit ID: Shelf: Slot: Unacknowledged Alarms: Circuit ID: Figure 11 Total Access System MAJOR MINOR Provisioning Framing CRC4 Enabled Coding HDB3 G.703 Clock Internal Loopback Timeout None Service State In Service Network Source G.703 G.703 External Alarms Disabled Core Frame Mapping Method 1...
  • Page 11: Figure 14. Reg #1 Status Screen

    Figure 13, Figure 14 Shelf: Slot: Unacknowledged Alarms: Circuit ID: Loop 1 <Network> Loop 2 01 dB 01 dB 000/00000 000/00000 000/00000 000/00000 000/00000 000/00000 Loopbacks Inactive LTU Signal Quality Zero Registers LTU/NTU Status Shelf: Slot: Unacknowledged Alarms: Circuit ID: Loop 1 <Network>...
  • Page 12: Table 3. Lp1 And Lp2 Guidellines

    See Table 3 Table 3. LP1 and LP2 Guidellines < < < > Shelf: Slot: Unacknowledged Alarms: Circuit ID: _____ | LTU | --->| NET | <---| |_____| Figure 15 i l a i l a i l a Total Access System MAJOR MINOR Alarms NO ALARM CONDITIONS...
  • Page 13: Figure 17. Performance History Screen

    Figure 17 Shelf: Slot: Unacknowledged Alarms: Circuit ID: _____ | LTU | --->|-----|<=====>|-----|<=====>|-----|<=====>|-----|<—- NET | <---|-----|<=====>|-----|<=====>|-----|<=====>|-----|—> |_____| Shelf: Slot: Unacknowledged Alarms: Circuit ID: Menu LTU G.703 LTU Loop 1 LTU Loop 2 NTU G.703 NTU Loop 1 NTU Loop 2 REG1 NET Lp1 REG1 NET Lp2 REG1 CST Lp1...
  • Page 14: Figure 19. Protection Configuration Screen – Auxiliary

    Figure 18 Shelf: Slot: Unacknowledged Alarms: Circuit ID: Figure 18. Protection Configuration Screen – Main Shelf: Slot: Unacknowledged Alarms: Circuit ID: Current System Status [ Prot Disabled ] Lock-in for 12 hours if 03 switchovers occur in 20 minutes. Figure 19. Protection Configuration Screen – Auxiliary Total Access System MAJOR MINOR Protection Configuration...
  • Page 15: Table 4. Protection Configuration Option Settings

    Table 4. Protection Configuration Option Settings i t c 61182007L1-5A c i t c t i t a i f i t i s r , e r l l i . t i t t e . s t i t a .
  • Page 16: Figure 20. Set Circuit Id Screen

    Shelf: Slot: Unacknowledged Alarms: Circuit ID: Figure 20 Total Access System MAJOR MINOR Set Circuit ID Enter ID: ‘?’ - System Help Screen Figure 20. Set Circuit ID Screen Section 61182007L1-5, Issue 1 04/07/01 09:21 61182007L1-5A...
  • Page 17: Figure 21. Alarm Option Screen

    Figure 21 6. HDSL DEPLOYMENT GUIDELINES Shelf: Slot: Unacknowledged Alarms: Circuit ID: 61182007L1-5A 7. MAINTENANCE Total Access System MAJOR MINOR Alarm Options Current Settings ES Alarm Level Major SES Alarm Level Major ES Alarm Threshold SES Alarm Threshold Selection: ‘?’ - System Help Screen Figure 21.
  • Page 18: Product Specifications

    8. PRODUCT SPECIFICATIONS Table 4 Table 5. Total Access 3000 LTU Specifications Loop Interface Ω Network Interface Ω Power Clock Tests Physical Environment ° ° ° ° Part Number Section 61182007L1-5, Issue 1 61182007L1-5A...
  • Page 19: Warranty And Customer Service

    9. WARRANTY AND CUSTOMER SERVICE International Equipment Warranty, ADTRAN, Inc. Attention: International Department 901 Explorer Boulevard Huntsville, Alabama 35806 www.adtran.com Asia Pacific - Hong Kong 852 2824-8283 voice 852 2824-8928 fax sales.asia@adtran.com Canada - Ontario 1 416 290-0585 voice 1 416 296-1259 fax sales.ontario@adtran.com...
  • Page 20 Section 61182007L1-5, Issue 1 61182007L1-5A...
  • Page 21: Hdsl H-Lss Circuit Configuration And Turnup

    HDSL H-LSS Circuit Configuration and Turnup Introduction Prerequisite Procedures NOTE Slots 6 and 7 are not NOTE 61182007L1-5A Appendix A for G.703 Fed Systems Materials Required 1. INSTALL THE LTUs INTO TOTAL ACCESS 3010 1.1 Gently but firmly push the LTU into the appropriate odd-numbered slot (which will be the MAIN HDSL circuit).
  • Page 22 2.1 Logon to Total Access system. 2.2 Check to ensure the LTU line cards are correctly provisioned according to circuit parameters. Under the Provisioning menu, set numbered option, Network Source, to G.703. This option causes the LTU to look to the individual G.703 backplane connector for its data feed.
  • Page 23 4.1.4 Upon provisioning of the NTUs, the faceplate LEDs should read as shown in Table 1. NOTE 5. RESET ALL EQUIPMENT TO OPERATING CONDITION In Service 5.1 From the Total Access 3010 LTU Provisioning Screen for both the MAIN and AUX LTUs, select the Service State option, and place both LTUs In Service.
  • Page 24 Section 61182007L1-5, Issue 1 61182007L1-5A...
  • Page 25 After unpacking the unit, inspect it for damage. If damage is discovered, file a claim with the carrier, then contact ADTRAN. See Warranty and Customer Service. 2. INSTALL THE DS3 MUX MODULES 2.1. Install the DS3 MUX Module into Total Access 3010.
  • Page 26: Table B-1. Faceplate Led Indicator

    Table B-1. Faceplate LED Indicators NOTE 2.2 Provision the DS3 MUX NOTE 2.2.1 Logon to Total Access system. 2.2.2 If you are building a new DS3 circuit, provision the DS3 MUX modules according to circuit parameters. If the HDSL H-LSS circuit is to be turned up in an existing Total Access 3010 with DS3 feed, assume that the parameters have already been set for the DS3...
  • Page 27 3. INSTALL THE LTU The Total Access 3010 LTU delivers an E1 signal over an HDSL local loop. The local loop in the H-LSS configuration includes two independent 4-wire circuits. The two LTUs communicate to their respective remote units, the NTUs. When an H-LSS switch occurs, the AUX circuit takes over transmitting the data load from the MAIN circuit until the MAIN circuit is restored.
  • Page 28 3.2.5 From the provisioning menu of the AUX circuit, reset the AUX unit to OOS-M. 3.2.6 Logoff the system. a. From the Total Access Menu, select Option 7, Logoff, and press <Enter>. b. From the Exit and Logoff screen, select “Y” and press <Enter>. 4.
  • Page 29 NOTE 7.0.1 Disabling protection switching. a. Access the AUX LTU and select Option 2, Provisioning, from the HDSL Main Menu. b. From the Provisioning Menu, choose the Service State option. c. Select Option 3, Out Of Service-Unassigned. d. Escape out of the AUX LTU menus and proceed to the MAIN LTU Menu.
  • Page 30 Section 61182007L1-5, Issue 1 61182007L1-5A...

This manual is also suitable for:

Total access 3010 ltu

Table of Contents

Save PDF