HDSL DDM+ Transceiver Unit for Central Office Installation and Maintenance Practice
Default Options Screen
The Default Options screen, illustrated in
options to the factory defaults. Each screen is shown to illustrate all the steps required to
accomplish the resetting of these options.
Circuit ID:HNTSVLALHDSL
34
RESET PROVISIONING OPTIONS TO FACTORY DEFAULTS
This screen will allow you to reset the provisioning of
this HDSL circuit back to the factory defaults. If you
do this, the options as shown on the provisioning screen
will change to the values that were programmed into this
unit from the factory. After defaulting the options,
you can always make changes to the options from the
provisioning screen.
Press "D" to reset the provisioning options to factory defaults.
Press "M" to return to the Main Menu.
Figure 22. Default Options Screen
Figure
22, allows the setting of all provisioning
MM/DD/YY hh:mm:ss
61247003L6-5A