Intended Use; Turning On - NOVOTEST TP-2020 Operating Manual

Connection and disconnection of socket and plug is shown in fig. 2.3.
Warning!
When disconnecting the plug from the socket, grasp its housing in a corrugated area, do not pull the
cable!

2.3 Intended use

2.3.1 Turning on

Turn the device on by pressing «
on the display (fig. 2.4).
Then, the device will go to the main menu (fig. 2.5). To select the menu item, use «
», and confirm the selection by pressing «
RDC.OD.TP-2020.000 OM
Coating Thickness Gauge NOVOTEST TP-2020
Figure 2.2 – Connectors of the device
Figure 2.3 – Manipulating connectors
» on the control panel until a short-term splash screen appears
Figure 2.4 – Splash screen
Functional buttons
Figure 2.5 – The main menu of the device
».
Operation manual
» or «
Page 12