NOVOTEST TP-2020 Operating Manual page 4

Operation manual
Coating Thickness Gauge NOVOTEST TP-2020
Warning!
Please read this instruction manual carefully before using Coating Thickness Gauge NOVOTEST
TP-2020.
The operation manual (hereinafter referred to as «OM») includes general information intended for
acquaintance with information related to the operation of the product – Coating Thickness Gauge
NOVOTEST TP-2020 (hereinafter referred to as the device or thickness gauge). The document contains
specifications, a description of construction and actions, as well as information necessary for the correct
use of the product. Before use, study this document, as the device is to be used by those familiar with
the principles of operation and the design of the device.
To use the testing device properly, the following conditions shall be observed:
− testing methods;
− conditions of testing that meet the testing methods;
− trained user who has read this operation manual.
The manufacturer keeps the right to make minor changes that do not impair the technical
characteristics of the product. These changes may not be mentioned in the text of this document.
The delivery set includes the operation manual and datasheet of the device.
This OM applies to all device models.
Page 5
RDC.OD.TP-2020.000 OM