NOVOTEST TP-2020 Operating Manual page 24

Operation manual
Coating Thickness Gauge NOVOTEST TP-2020
In the program window, user can view of the scale and material of the saved measurement, diagram
or histogram of measurements by pressing «DIAGRAM/HISTOGRAM», and measurement results:
− Maximum;
− Minimum;
− Deviation;
− Average;
− Standard deviation;
− Mean square deviation;
− Variation coefficient;
− The homogeneity of the series;
− Number of measurements.
This information can be instantly printed, press «PRINT» for that. The printing window will be
opened (fig. 2.36), where the printer for data printing can be chosen and parameters of printing can be
set, then by pressing «OK», the window of protocol previewing will be opened (fig. 2.37).
Page 25
Figure 2.35 – «Working with archive» section
RDC.OD.TP-2020.000 OM