Table of Contents
Advertisement
Operation manual
Coating Thickness Gauge NOVOTEST TP-2020
3 MAINTENANCE OF THE DEVICE AND ITS COMPONENTS
3.1 Safety precautions
After putting into operation, it is recommended to inspect the device periodically to control the
following parameters:
− operability;
− compliance with the operating conditions;
− battery charge level;
− absence of external damages to the device components.
When working with a charger connected to the 220V network at 50 Hz, the requirements stated in
the "Safety rules for the operation of electrical installations of consumers" are mandatory.
If the device is not used for a long time, the batteries should be turned off or removed. In doing so,
the battery storage rules must be kept.
The users instructed and certified for the II qualification group for safety in working with electro-
radio measuring devices are allowed to use the device.
3.2 Verification
The recommended frequency of verification is at least once a year.
The device and reference blocks hall be verified by standardization, metrology, and certification
companies under GOST 8.502-84 GSI. Coating thickness gauges. Verification methods and tools (If
F-0.3; F-0.5; F-2; F-5; NF-0.5; NF-2; M-12; M-30; M-60; DSH probe is used) and MI 1903-88
Reference blocks of coating thickness. Verification methods and tools.
Note
The device shall be verified and the verification certificate shall be issued only by customer
–
order.
3.3 Warranty
The following warranty information is valid for all NOVOTEST products.
The manufacturer guarantees the conformity of the device to the requirements of the technical
conditions under the user's compliance with the conditions of transportation, storage and operation, and
timely maintenance at the manufacturer's premises at least once a year.
3.3.1 Basic warranty
The new NOVOTEST device purchased from the manufacturer or an authorized dealer is covered
by the basic 3-year warranty if the scheduled maintenance is done at least once a year.
If any part of the device fails due to the defect of the material or a manufacturer, it shall be repaired
or replaced by the manufacturer, or any authorized dealer of NOVOTEST, regardless of the transferring
of the ownership right to a third party during the warranty period.
The warranty on batteries and chargers is provided by the manufacturers of batteries and chargers,
and therefore they are not covered by the NOVOTEST warranty. However, the authorized dealer of
NOVOTEST will assist in making warranty claims regarding accumulators, batteries, and chargers.
The warranty applies from the date of purchase of the device, normally from the shipment date. If
the device is purchased by an intermediate, the warranty period starts from the date of receipt of the
device by an intermediate.
3.3.2 Extended warranty
The warranty on batteries and chargers is provided by the manufacturers of batteries and chargers,
and therefore they are not covered by the NOVOTEST warranty. However, the authorized dealer of
NOVOTEST will assist in making warranty claims regarding batteries, batteries, and chargers.
Page 27
RDC.OD.TP-2020.000 OM
Advertisement
Table of Contents
