Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NOVOTEST NVS P1
Summary of Contents for NOVOTEST NVS P1
- Page 1 Паспорт Виброметр NVS P3...
-
Page 2: Table Of Contents
С ОДЕРЖАНИЕ 1 DESCRIPTION AND OPERATION OF THE DEVICE AND ITS COMPONENTS 1.1 The purpose of the device 1.2 Technical characteristics of the device 1.3 Standard delivery set 1.4 Parts 1.5 Marking and sealing 1.6 Packing 2 INTENDED USE 2.1 Operational limitations 2.2 Preparing the device for use 2.3 Using the device 2.3.1 Turning on... - Page 3 Caution! Please read this manual carefully before using the Vibration Meter Pen NOVOTEST NVS P1. This operating manual (hereinafter O.M.) includes general information in order to give the operating personnel understanding of functioning and operating rules of the Vibration Meter Pen NOVOTEST NVS P1 (hereinafter referred to as the Vibration Meter Pen). The document contains technical characteristics, description of the design and principle of operation, as well as information necessary for the correct use of the device.
-
Page 4: Description And Operation Of The Device And Its Components
1 DESCRIPTION AND OPERATION OF THE DEVICE AND ITS COMPONENTS 1.1 The purpose of the device Vibration Meter Pen NVS P1 is used to study the vibration level of various mechanisms. The vibration level can be judged by acceleration, speed and degree of displacement. The Vibration Meter Pen is equipped with a built-in high-sensitivity vibration sensor in the form of a probe. -
Page 5: Parts
1 - vibration sensor; 2 - Vibration Meter Pen body; 3 - "Modes" key; 4 - LCD display; 5 - key for switching on and measuring. Fig 1.1 – Vibration Meter Pen NVS P1 1.5 Marking and sealing The manufacturer's logo is applied to the front panel of the device. -
Page 6: Intended Use
2 INTENDED USE 2.1 Operational limitations The operation of the device must be carried out under the conditions of influencing factors and taking into account the parameters of the controlled objects in accordance with the agreed technical characteristics, and the device must also be used within the framework of its technical characteristics. -
Page 7: Measurements
Velocity is the most commonly used parameter and is used to measure vibration in accordance with ISO 2372, BS 4675, VDI 2056 and ISO 10816. Velocity is measured in mm / s. Vibration displacement measurement mode Due to its good low frequency response, this parameter is usually used in low speed applications. -
Page 8: Technical Maintenance Of The Product And Its Components
3.2 Warranty The following warranty information is valid for all NOVOTEST products. The manufacturer guarantees the conformity of the device to the requirements of the technical conditions under the user's compliance with the conditions of transportation, storage and operation, and timely maintenance at the manufacturer's premises at least once a year. -
Page 9: Maintenance
4 MAINTENANCE The device by type of performance and taking into account operating conditions refers to products that are repaired at special enterprises or at the manufacturer. To set the device for warranty service in the service center (SC), it is necessary to present correctly completed SERVICE AND MAINTENANCE RECORDS for the device.
Need help?
Do you have a question about the NVS P1 and is the answer not in the manual?
Questions and answers