Contents Safety and Important Information Pack Contents Dimensions Technical Data Installation Requirements Installation Bath & Shower Mixer 10-11 Porter´C / Porter´S 12-13 Adjustement Hot Water Limiter Adjustment Operating your Shower Cleaning Spare Parts 16-19 Trouble Shooting Warranty If there are any queries regarding this product or its installation, please contact the Hansgrohe technical hotline: 0870 7701975...
Safety and Important Information Hansgrohe products are safe provided they are installed, used and maintained in accordance with these instructions and recornrnendations. Please read these instructions thoroughly and retain for future use. The plumbing installation of this shower must comply with the requirements of UK Water Regulations/Bylaws (Scotland), Building Regulations or any other regulations specified by the local Water Authority and supplier.
Pack Contents Please check that you have been supplied with the following: Sportive² Bath & Shower Set Status Bath & Shower Set 1 Bath-shower mixer 1 Bath-shower mixer 2 Fibre washers 2 Fibre washers 3 Escutcheons 3 Escutcheons 4 S-unions 4 S-unions Avista Bath &...
Page 6
Porter S 1 Hand shower cursor 2 Washers 3 Fixing screws 4 Wall plugs Porter Club 1 Hand shower cursor 2 Fixing screws 3 Wall plugs Hand Shower & Hoses 1 Hose Marin 2 Hose Verso 3 Status hand shower 4 Sportive²...
Status Bath & Shower Mixer Status Bath & Shower Mixer with pillar union Technical Data Sportive² / Avista /Status Bath & Shower Set Operating pressure: max. 1 MPa Recommended operating pressure: 0,1 - 0,5 MPa Test pressure: 1,6 MPa Hot water temperature: max.
Installation Requirements This mixer valve must be installed in compliance with current Water Regulations. If you have any doubts about the Water Regulation requirements contact your local water services provider or use the services of a professional plumber. This mixer valve is suitable for use with the following water supply systems: Gas Combination Boiler (multi-point) 1.0 - 10 bar* Unvented System (pressure balanced) 1.0 - 10 bar...
Bath/Shower Mixer Bath/Shower Mixer with pillar union Two options 1. The hot and cold water outlets should be 150mm apart (plus or minus 12mm). Hot on the left and a. As the shower mixer above (positioned over a cold on the right (fig. 1). The recommended bath).
Page 14
Where the contractor mounts the product, 1. Measure the desired space for the fixation points he should ensure that the entire area of of the wall support. Adjust the dimensions to the the wall to which the mounting plate is to tile pattern if required (fig.
Operating your Shower Cleaning Cleaning materials for Mixers and The mixer is actuated by lifting the lever head. Showers Swivel to the left = hot water (fig. 1), swivel to the right = cold water (fig. 2). Acids are necessary ingredients of cleaning materi- The flow is changed from bath to shower function by als for removing lime.
Page 19
Spare Parts Status Bath & Shower Set Spare parts handle 32097000 1.1 screw cover 96338000 flange 96656000 96690000 cartridge, assy 92730000 locking screw for handle 96059000 escutcheon Ø 68 mm 96467000 S - unions (2) 94140000 noise reduction (2) 96429000 aerator cpl.
Page 20
Spare Parts Porter´S, Porter Club, Hose Avista 28268002 Hand Shower & Hose Hose Sportive² / Status 28275000 Hand shower Status 28778000 Hand shower Sportive² 28779000 Hand shower Avista 28359000 Porter´S Sportive² / Status 28331000 Porter Club Avista 27521000...
Trouble Shooting Fault Cause Remedy Insufficient water - Shower filter seal dirty - Clean filter seal between show- er and hose - Non return valve didn’t move - Exchange non return valves back Mixer stiff - Cartridge defective,calcified - Exchange cartridge Mixer dripping - Cartridge defective - Exchange cartridge...