Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Coway BB14-AMY
Summary of Contents for Coway BB14-AMY
- Page 1 BB14-AMY Water Softener • This product is designed for domestic use only and is not available for other countries with different water pressure system. • Please read this User Manual for your safety and proper usage of the product.
- Page 2 FEATURES Simple to install and use You can connect it using your current shower hose without the need for any other installation materials. Slim design B rightens bathroom atmosphere with its slim lines plus its tidy yet luxurious design. Vitam Vitam Convenient function selection dial C onvenient to use thanks to the function selection dial, which...
-
Page 3: Table Of Contents
DEAR COWAY CUSTOMERS, Coway water softener Thank you for using this Please be sure to read this guide to learn about correct usage and maintenance of this product. Should you experience any problems while using the product, you can refer to this instruction manual to resolve them. -
Page 4: Safety Information
SAFETY INFORMATION This information is about safety and you must follow these directions! These warnings intend to keep users safe and avoid damage to the product. Please read them carefully and use the product correctly. There is risk of serious injury There is risk of considerable There is risk of slight bodily or death if you do not follow... - Page 5 B e sure to close the filter tank and regeneration tank lids and check whether they have been completely tightened. There is risk of fire. S top using this softener if you experience any skin problems due to soft water. People with sensitive skin may experience rashes, allergies or skin problems when using soft water.
-
Page 6: Parts Name
PART NAME Front / Rear Feature selection dial cover Flow gauge needle Flow gauge Water outlet Tray Reset button Water inlet Drain hose Normal components Composite Shower Shower Regeneration Rubber filter Cap opener hose A hose B packing (4) sticker * If there is leakage while connecting the shower hose and shower head, add extra rubber packing. - Page 7 Wall type Stand type Regeneration tank lid FILTER CAP-OPENER Filter tank lid SALT Installation parts of the wall Components for stand installation mount-type (Optional Accessories) Bracket Anchor/screw Connector Rubber packing * The installation materials above may differ.
-
Page 8: Pipe Diagram And Soft Water Flow
PIPE DIAGRAM AND SOFT WATER FLOW Pipe diagram (BB14-AMY) Product diagram 1 Water source entry 2 Changing source water to preset pressure 3 Selecting “Tap Water”/”Soft water”/”Regeneration” 4 Removal of airborne material and chlorine residue 5 Removal of ingredients causing hardness (metallic ions: calcium, magnesium, etc.) - Page 9 INFORMATION TO NOTE BEFORE USING Please Read the Information Below Before Using the Product ■ After installation ■ When the product is not being used for a long time Check for connecting hose leakage. If the product hasn’t been used If there is leakage, turn off the tap and then contact our A/S center.
- Page 10 HOW TO USE How to Use Soft Water/Tap Water ■ When using soft water 1. Turn the function selection dial to “Soft water” to set it. 2. Check the location of the function selection dial handle, then turn on the tap to use soft water. ■...
- Page 11 HOW TO REGENERATE 1. Check the flux gauge at the front of the product to identify whether the time to regenerate has been reached. (This is determined by the hardness of the water supply.) * The flux gauge needle indicates the amount of softened water used.
- Page 12 HOW TO REGENERATE 6. When regeneration is complete after about 15 minutes, press the Reset button to reset the soft water consumption. (When regeneration is complete, the timer sound stops and the function selection dial turns to “Regeneration complete”) 7. S et the Feature selection dial to “Soft.” Then turn on the tap and make sure that the water flow for one to two minutes before using the softened water.
- Page 13 HOW TO REPLACE REGENERATION MATERIAL 1. Close the tap and open the upper cover. ▶ 2. Open the drain valve and regeneration cap and empty the tray. SALT ▶ 3. Pour two packs of regeneration material into the regeneration tank. * 2 packs of regeneration material are 1.24 kg.
- Page 14 FILTER REPLACEMENT 1. Turn off the tap. 2. Open the upper cover of the water softener and turn the filter lid counter-clock- wise to open. ▶ FILTER 3. Remove the contaminated filter and insert the new filter. ▶ 4. Use the cap opener to turn the filter tank lid clockwise to completely close it, then turn the function selection dial to “Soft water”...
-
Page 15: Notes On Installation
NOTES ON INSTALLATION Attention! ■ Do not install in areas with low ■ Soft water may be less effective in water pressure (less than 0.07 MPa) areas where underground water is used. In areas with low water pressure, water may not flow well due to Underground water is harder than decreased flow rate. -
Page 16: How To Install
HOW TO INSTALL Product Installation (Stand) 1. Turn off the tap. 2. Insert the rubber packing into the connector. 3. With the water softener on its side, connect both the inlet (IN) and outlet (OUT) connectors. Water inlet(IN) Water inlet(IN) ▶... - Page 17 5. Connect the separately-packaged connecting hose to the product outlet connector and connect the separated shower head. ▶ 6. Open the upper cover of the water softener and use the filter cap opener to turn the right filter tank lid counter-clockwise to open. ▶...
- Page 18 HOW TO INSTALL 8. Turn the function selection dial to “Soft water” and then turn on the tap in order for yellow soft water to flow. 9. Check for leaks or other abnormalities and then close the cover. 10. Attach the regeneration sticker ( ) to Point 4 on the flow gauge.
-
Page 19: Product Installation (Wall)
Product Installation (Wall) 1. Turn off the tap 2. Use the anchors and screws to fix the hanger to the wall and hang the main body on the hanger. Check to ensure that it is firmly in place. ▶ 3. Remove the shower head connecting the shower hose, then insert the rubber packing into the shower hose and connect to the input at the bottom of the softener. - Page 20 HOW TO INSTALL 5. Connect the separately-packaged connecting hose to the product outlet and connect the separated shower head. ▶ ▶ 입수(IN) 입수(IN) 출수(OUT) 출수(OUT) 6. Open the upper cover of the water softener and use the filter cap opener to turn the right filter tank lid counter-clockwise to open.
- Page 21 8. Turn the function selection dial to “Soft water” and then turn on the tap in order for yellow soft water to flow. 9. Check for leaks or other abnormalities and then close the cover. 10. Attach the regeneration sticker ( ) to Point 4 on the flow gauge.(See the tips on P.10.) - The composite filter is composed of a sediment filter and vitamin C.
-
Page 22: How To Clean
HOW TO CLEAN How to Clean the Water Softener 1. Wet a soft sponge or cloth in neutral detergent to wipe the outside of the water softener. 2. Wipe the water softener surface with a dry cloth to prevent water or detergent remains. -
Page 23: Soft Water And Hard Water
■ T his Coway water softener removes hard water components from water source to make soft water. - This Coway water softener removes hard water components from source water using ion exchange resin to make soft water. - Regeneration refers to the restoration of the performance of the ion exchange resin, which weakens after it has absorbed a lot of hard water ingredients, and is an important process in restoring the softener’s performance. - Page 24 BEFORE REQUESTING SERVICE The product may not operate correctly for minor reasons or due to unfamiliar methods of use; that are not product malfunctions. In such cases, the problem can be solved easily without the need to resort to going to a service center if the following items are checked.
- Page 25 Problem What to check Steps to take When you turn the function selection dial The water softener is to Regeneration, a timer operates and there • Is the water softener regenerating? is a ticking noise. The noise will stop when making noise.
- Page 26 About 9 kg (with regenerant inserted) Manufacturer Coway Co.,Ltd. ▶ Specifications may be changed slightly without prior notice to improve product performance. MALAYSIA Add: COWAY (M) SDN. BHD Level 20, Ilham Tower, No. 8, Jalan Binjai, 50450 Kuala Lumpur. Careline : 1800-888-111...
- Page 27 MEMO...
- Page 28 MADE IN KOREA 1229862 www.coway.com...
Need help?
Do you have a question about the BB14-AMY and is the answer not in the manual?
Questions and answers