Table of Contents
Advertisement
7
Installing the Striker
Position the striker on the door frame such that the bolt tongue can extend smoothly into the striker.
Use provided shim plates if needed. Secure the striker with four screws, if needed, use longer ones
provided.
Position: Adjacent to Back Assembly
Front View of the Installation
Bolt Tongue
Striker
Screws
ST FH4 X 25 x4
Position: Perpendicular to Back Assembly
Front View of the Installation
Screws
ST FH4 X 25 x4
Note: Backset needs to be > 90mm to
fit striker in perpendicular position.
12
(for outswing door)
Advertisement
Table of Contents
