Related Manuals for Kangaroo Dingo II K7905
Summary of Contents for Kangaroo Dingo II K7905
- Page 1 ASSEMBLY INSTRUCTIONS D i n g o I I ITEM NO.: K7905 Teak K7911 Ash White SEW IN COMFORT. SEW LONGER.™...
-
Page 2: General A Ssembly Guidelines
General A ssembly Guidelines Read the instructions carefully before beginning the assembly process to ensure proper assembly of this product. Please open and inspect the contents of box(es) to see that all parts and hardware are included. 2. Tools Required Phillips Screwdriver Hammer Electric Screwdriver... -
Page 3: Item Description
Par ts List: Panels ITEM DESCRIPTION QTY. PACK. ITEM DESCRIPTION QTY. PACK. Bottom 4 of 4 Drawer Back 3 of 4 Drawer Back 4 of 4 Drawer Front 3 of 4 Drawer Bottom 4 of 4 Drawer Front 3 of 4 Top Panel 4 of 4 Drawer Front... -
Page 4: Par Ts List: Hardware
Par ts List: Hardware 8x16 Fix Bolt x20 ⁄ “ 8x30 Dowel Pin x58 6x35 Cam Bolt Cam Cover 4x24 Fix Bolt x4 3.5x30 Screw 3.5x14 Screw 3.5x20 Screw Allen Wrench x1 Handle x2 14mm Wrench x1 Alignment Pin Lock Lock plate Butt Hinge x4 Hinge Body x6... - Page 5 Par t 1: Cabinet Shell We can’t wait to get your brand new Dingo II Storage Cabinet up and running. Please contact our Customer Service Team at 1-800-533-7347, ext. 1 during normal business hours with any assembly related questions. Locking Plate Caster x2 Underside of Panel G Plate Caster x3...
- Page 6 Par t 1: Cabinet Shell 6x35 Cam Bolt 8x30 Dowel Pin x26 Attach 2 c1 Cam Bolts to Panel D. Insert 12 d1 Dowel Pins into the edges of Panel D. Attach 2 c1 Cam Bolts to Panel X. Insert 6 d1 Dowel Pins into the Insert 4 d1 Dowel Pins into the edges of Panel Y.
- Page 7 Par t 1: Cabinet Shell ⁄ “ Cam Cover 180° Attach Panels X, Y and Z to Panel D. Tighten Cam Locks and apply Cam Covers Attach Panel G to Panels D, X, Y and Z as shown. Tighten cam locks and apply c2 Cam Covers.
- Page 8 Par t 1: Cabinet Shell 3.5x14 Screw ⁄ “ Cam Cover 6x35 Cam Bolt Lock Lock plate Attach L Lock Plates to Panel A with s1 Screws. Set aside the rest of the lock and keys Lower Panel A, inserting cam bolts on Panel A onto cams on Panels X, Y, Z and D.
- Page 9 Par t 1: Doors 3.5x14 Screw Lock Hinge Body x6 Lock plate 3.5x20 Screw 4x24 Fix Bolt x4 Attach L Lock to Pan- el V2 with s2 Screws. Repeat with Panel V1. Attach g1 Hinge Body to Panel V1 with s1 Screws. Repeat with Panel Press the trim kit around the...
- Page 10 Par t 1: Doors 3.5x14 Screw Attach g1 Hinge Body on Panels V1 and V2 to Panels X and Z with s1 Screws. Dingo II Assembly Instructions...
- Page 11 Par t 1: Gateleg Leaf Suppor ts 14mm Wrench x1 3.5x14 Screw Alignment Pin Butt Hinge x4 Caster x2 Attach s4 Alignment Pin to the top edge of Panels O1 and O2. Attach h1 Butt Hinges to Panels O1 and O2 using s1 Screws.. Attach t1 Casters to the bottom edge of Panels O1 and O2 using r3 Wrench.
- Page 12 Par t 2: Drawers 8x30 Dowel Pin x32 6x35 Cam Bolt Panel K: Panel K3: Attach 6 c1 Cam Bolts Attach 2 c1 Cam Bolts Insert 4 d1 Dowel Pins Panel K1: Attach 4 c1 Cam Bolts Panel K2: Insert 2 d1 Dowel Pins Attach 4 c1 Cam Bolts Insert 2 d1 Dowel Pins Panel K4:...
- Page 13 Par t 2a: “L” Drawers ⁄ “ Cam Cover 3.5x30 Screw To reach the pre-drilled screw holes on the sides of Panels L1 and Attach Panels L1 and L2 to Panel L as shown above. L2, you will need to tilt the drawer runners. Tighten cams and apply c2 Cam Covers.
- Page 14 Par t 2b: “K” Drawer Attach Panel K3 to Panel K8 as shown. Tighten cams and apply c2 Cam Covers. ⁄ “ Cam Cover Attach Panels K1 and K2 to Panels K3 and K8 as shown. Tighten cams and apply c2 Cam Covers.
- Page 15 Par t 2c: “K4” Drawer Attach Panel K7 to Panel K8 as shown. Tighten cams and apply c2 Cam Covers. ⁄ “ Cam Cover Attach Panels K5 and K6 to Panels K7 and K8 as shown. Tighten cams and apply c2 Cam Covers.
- Page 16 Par t 2: Drawers Fully extend the cabinet rails, align drawer rails, and slide drawers into cabinet. Be sure that the silver ball bearing pieces are positioned all the way to the front of the rails. TIP: Once you hear the drawer runners “click” into place, gently open and close the drawers a few times to engage the Soft Close mechanism.
-
Page 17: Limited Lifetime Warranty
Kangaroo Sewing Furniture is designed for residential use only. ARROW SHALL HAVE NO LIABILITY for ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND and all such damages are EXCLUDED FROM THIS Warranty, such as loss of use, disassembly, transportation, labor, or damage to property on or near the product. - Page 18 Accessories to Complete Your Sewing Studio Custom Insert Arrow Sewing Chairs Enhance your sewing experience with a custom Arrow’s #1 Rated Height Adjustable Sewing Chair acrylic sewing insert! Custom acrylic sewing is a must have accessory for your dream sewing inserts are designed to fill the gap between your room! Cute, comfortable and convenient - our sewing machine and sewing cabinet’s lift opening...
Need help?
Do you have a question about the Dingo II K7905 and is the answer not in the manual?
Questions and answers