Related Manuals for Kangaroo Dingo II K7905
Summary of Contents for Kangaroo Dingo II K7905
- Page 1 ASSEMBLY INSTRUCTIONS D i n g o I I ITEM NO.: K7905 Teak K7911 Ash White SEW IN COMFORT. SEW LONGER.™...
- Page 2 Read the instructions carefully before starting. Please open and inspect the contents of boxes to see that all parts are included. You will need a Phillips head and a flat head screwdriver. A power screwdriver or cordless drill is preferable. Ensure that the Phillips head fits neatly and fully engages the screw to avoid damage to the screws.
-
Page 3: Parts List
Par ts List ITEM DESCRIPTION QTY. PACK. ITEM DESCRIPTION QTY. PACK. Bottom 1 of 4 Drawer Back 3 of 4 Drawer Back 1 of 4 Drawer Front 3 of 4 Drawer Bottom 1of 4 Drawer Front 3 of 4 Top Panel 1 of 4 Drawer Front 3 of 4... - Page 4 Par ts List ITEM DESCRIPTION QTY. ITEM DESCRIPTION QTY. 6x35 Cam Bolt Butt hinge 8x30 Dowel Pin Handle ⁄ “ Cam Cover Hinge Body Caster 4x24 Fix Bolt Locking Plate Caster 8x16 Fix Bolt Wrench 3.5x14 Screw 14mm Spanner 3.5x30 Screw Lock x2, Lock Plate x2, Key x2 3x20 Screw Alignment Pin...
- Page 5 Step 1. Panel G assembly. 1. Fix casters t2 to panel G with bolts b1 as illustrated below using wrench a to tighten. 2. Turn panel over to side with care. 3. Install cam bolts c1 into panel G as illustrated below. 8x16 Fix Bolt x20 Locking Plate Caster x5...
- Page 6 Step 2. Preparation Panels A, X, Z, Y and D 1. Insert cams bolts c1 into panels A, X, Z and D as illustrated below. 2. Insert dowel pins d1 to panels X, Z, Y and D as illustrated below. 6x35 Cam Bolt 3.
- Page 7 Step 3. Panels D, Y, X, and Z assembly. Insert cam bolts c1 on panels Y, X and Z into cams on panel D and tighten in a clockwise direction as illustrated below. Apply cam covers c2 over tightened cams. ⁄...
- Page 8 Step 5. Flip cabinet over. Step 6. Panel A assembly. 1. Insert cam bolts c1 on panel A into cams on panels X, D, Y and Z and tighten in a clockwise direction. 2. Reinstall lower drawer runners on panels X, Y and Z. 3.
- Page 9 Step 7. Preparation Panels O1, O2, V1 and V2 1. Fix hinge bodies g1 to panels V1 and V2 with screws s1 as illustrated below. 2. Fix locks L to panels V1 and V2 with screws s3 as illustrated below. Snap lock trim ring found on lock L to end of lock cylinder as shown in detail below.
- Page 10 Step 8. Door Panels V1 and V2 assembly. 1. Attach V1 and V2 door assembly using hinge bodies g1 with screws s1 to panels X and Z as illustrated below. 3.5x14 Screw Step 9. Panels 01 and O2 assembly. 1. Locate the pilot holes for hinges on back panel D. Fix hinges on O1 to D using 3 s1 screws per hinge. 2.
- Page 11 Step 10. Preparation Panels L, K, K1, K2, K3, K4, K5, K6, K7 and K8 1. Insert cam bolts c1 into panels L, K, K1, K2, K3, K4, K5, K6 and K7 as illustrated below. 2. Insert dowel pins d1 into panels K1, K2, K3, K5, K6, K7 and K8 as illustrated below. 6x35 Cam Bolt 8x30 Dowel Pin x34 Dingo II...
- Page 12 Step 11. Drawer(s) Panel L, L1, L2, L3 and L4 assembly. 1. Slide bottom panel L4 into L, L1, L2 slots. 2. Insert cam bolts c1 on panel L into cam on panels L1 and L2. Tighten cams clockwise. 3. Apply cam covers c2 over tightened cams. ⁄...
- Page 13 Step 13. Panel K4, K5, K6, K7 and K8 assembly. 1. Insert cam bolts c1 on panel K7 back into cams on panel K8 bottom. Tighten in clockwise direction. 2. Insert cam bolts c1 on panels K5 and K6 sides into cams on panel K8 bottom and K7 back. Tighten cams in clockwise direction.
-
Page 14: Additional Limitations
Caster damage as a result of moving furniture fully loaded or with locked casters. Damage resulting from electrical surge or lightning. Use in commercial or education environments. Kangaroo Sewing Furniture is designed for residential use only. ARROW SHALL HAVE NO LIABILITY for ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND and all such damages are EXCLUDED FROM THIS WARRANTY, such as loss of use, disassembly, transportation, labor or damage to property on or near the product. - Page 15 Arrow Sewing Chairs Enhance your sewing experience with a custom- Our adjustable height sewing chair is a perfect made insert for your Arrow or Kangaroo cabinet. accessory for any craft and sewing room. The Inserts are designed to reduce the gap between chair’s height is adjustable with easy to use...
Need help?
Do you have a question about the Dingo II K7905 and is the answer not in the manual?
Questions and answers