Step 3 - Thermostat Mounting; Step 4 - Initial Setup; Step 5 - Add Location And Room - Warmup 6iE User Manual

Step 3 - Thermostat Mounting

1
Insert fixing screws through
mounting holes of the power base
and tighten.

Step 4 - Initial Setup

1
Download the MyHeating App.

Step 5 - Add Location and Room

The MyHeating App will guide you through the setup of your 6iE. You will
have to set up your house location and then the room within which your new
6iE is located.
Location
A location needs to be setup before a room can be configured
and the 6iE device registered. Creating a location is user friendly
and easy to follow, it is advised to have details of your current
energy tariff and pricing to hand, as these will be required if you
wish to use the energy monitoring features.
Room Setup
With a location now setup, the next step is to register a room
in which your 6iE is located. This is the heating zone your
thermostat will control. Ensure you set the correct System Type
and Wattage of heaters connected.
NOTE: If an external relay or contactor relay has been installed please set
System Type as Electric + Relay.
'MyHeating'
by Warmup
2
Re-attach the display to the power
base. You can now restore power
to the circuit and power up the 6iE.
Follow the on screen instructions
to set up the system. Once set up a
QR Code will appear.
2
Network Setup
Open the MyHeating App
on your phone and scan
this code to proceed
Dismiss
Open the My Heating App and scan
the QR Code on the 6iE screen.
Follow the instructions in the App
to complete setup.
7
Language
English