Warmup 3iE Operating Manual
Warmup programmable thermostat
Hide thumbs
Also See for 3iE:
- Installation and operation manual (36 pages) ,
- Installation manual (28 pages) ,
- Operating manual (9 pages)
Table of Contents
Advertisement
Operating Guide:
for the Warmup 3iE Programmable Thermostat
INTRODUCTION
Your thermostat's default screen is the Home Screen. This screen displays important information such as the time,
current floor and air temperature as well as the target set temperature. From this page you can either
access the "MENU" page (press "menu") or override the current programmed temperature (press "
When using the 3IE thermostat there are some general rules to keep in mind:
If you do not press any button on the thermostat for 1 minute, then it will go to standby mode. In standby mode the
screen will be dimmed but the thermostat will continue to function as normal. To exit standby mode press
"wake" ( ).
The button on bottom of the 3IE (button 7) is the power button. You can turn off your thermostat and Warmup
underfloor heating system by holding down this button for 3 seconds. You can turn it on again by holding it down for
another 3 seconds.
This button can also be used if you get lost in the menus, press the power button on the bottom once to return to the
home screen.
GETTING STARTED
On initial power up the thermostat will guide you through set up procedure for the following:
• Language
• Time preference and Settings
• Date preference and settings
• Daylight savings
• Temperature Preference
• Theme
(1) Pressing " " allows you to confirm your selection
(2) Pressing "
menu sequence
(3) Pressing the "
the setting which is highlighted
(4) Pressing an illuminated button in this group will
allow you to highlight another setting to edit
(5) Pressing an illuminated button in this group will
allow you to select another option in the menu
(6) When this light is illuminated it indicates that power is
being directed to the heaters
Hint: You will often find a "help" button on pages with
several options. Press the help button for more
information on the options available.
• Brightness
• Standby Brightness
• Heating LED
• Audio Feedback
• Floor type
• Set heating target
" or "
" takes you back to a previous page in the
" and "
" buttons allow you to change
• Program schedule
• Set energy monitor (You may
skip this section and complete at a
later date )
3iE Operating Guide V4 © Warmup plc - 2013
").
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Warmup 3iE
Summary of Contents for Warmup 3iE
- Page 1 “wake” ( ). The button on bottom of the 3IE (button 7) is the power button. You can turn off your thermostat and Warmup underfloor heating system by holding down this button for 3 seconds. You can turn it on again by holding it down for another 3 seconds.
- Page 2 “OK” will enter the schedule and return you to the home screen. Note: The set temperature for the time before the first period of the day comes from the night before. 3iE Operating Guide V4 © Warmup plc - 2013...
- Page 3 PRE-SET PROGRAMS If you are using your 3IE thermostat to control heating in the bathroom, bedroom, kitchen or living room then the pre-set schedules might help you set a program appropriate for you. Just select the desired pre-set room and everything is done automatically.
- Page 4 The total amount of energy used in the entire time span is displayed in the bottom bar. Press “OK” to return to the ENERGY MONITOR page. 3iE Operating Guide V4 © Warmup plc - 2013...
- Page 5 SETTINGS Your 3IE is a very flexible device and be configured in many different ways to meet your requirements. Functions that can be accessed in the “settings” menu include: “time”...
- Page 6 “Advanced settings” • WARNING!! The options in this section can affect the performance of your thermostat and should only be modified by an experienced underfloor heating installer or under the instruction of Warmup technical support. DISPLAY / AUDIO “theme” • Change the content and style of home screen and standby screen “standby brightness”...
- Page 7 ADVANCED SETTINGS WARNING!! The options in this section can affect the performance of your thermostat and should only be modified by an experienced underfloor heating installer or under the instruction of Warmup technical support. Programmable Limit °C Overheat Limit °C Floor Min.
- Page 8 (ii) contact Warmup. Warmup will determine whether the product should be returned, or replaced. This warranty does not cover removal or reinstallation costs, and shall not apply if it is shown by Warmup that the defect or malfunction was caused by failure to follow the instruction manuals, incorrect installation or damage which occurred while the product was in the possession of a consumer.
Need help?
Do you have a question about the 3iE and is the answer not in the manual?
Questions and answers
Our warmup floor thermostat (3iE) was installed in 2016 and has worked fine until last week when the screen went black and we noticed 3 tiny blue lights flashing at night (they are always flashing, we just didn't initially see them). What is the problem? Thank-you
If a Warmup 3iE thermostat has a black screen and flashing blue lights, it could indicate a power issue or a system fault. The thermostat may have entered standby mode if no buttons were pressed for 1 minute, causing the screen to dim, but flashing lights suggest a deeper fault. It may also require a reset by holding the power button for 3 seconds, or it could be experiencing a wiring or hardware problem that needs professional inspection.
This answer is automatically generated