Priority Tag Insert/Remove; System - UNICOM GST Series User Manual

All manuals and user guides at all-guides.com

Priority Tag Insert/Remove

Sets each port's tagging control. There are four choices of port tagging
control:
Disable: No port tagging control on this port.
Remove tag: Removes the packet's tag as the packet passes through
this port.
Insert Tag (high priority only): Inserts the packet's tag as the packet
passes through the high priority port.
Insert Tag (All frame): Inserts the packet's tag when the packet passes
through this port.

System

You can enable VLAN function and broadcast storm filtering control, set up
the name of the switch, and reset the switch to default value. Enter the
selection number to configure.
VLAN Function: enter "1" to change the value.
Switch Name: enter "2" to change the switch name. The default switch
Priority Tag Insert/Remove interface