Philips sonicare Manual page 20

20
English
Pressure sensor
- Triple tone of high-med-low means the
Brush head replacement reminder
feature has been deactivated. The brush
head replacement light and battery light
will blink amber once in unison to
confirm deactivation.
Note: The brush head replacement reminder
only works in combination with Sonicare smart
brush heads (see 'Brush heads').
1 Put the handle on the plugged-in charger.
2 Press and hold the power on/off button
while the handle remains on the charger.
3 Keep the power on/off button pressed until
you hear a series of three short beeps (up
to 7 seconds).
4 Release the power on/off button.
- Triple tone of low-med-high means the
pressure sensor feature has been
activated. The brush head replacement
light and battery light will also blink
green 2 times in unison to confirm
activation.
- Triple tone of high-med-low means the
pressure sensor feature has been
deactivated. The brush head
replacement light and battery light will
also blink amber 1 time in unison to
confirm deactivation.