Activating Or Deactivating Features - Philips sonicare Manual

18
English
Quadpacer

Activating or deactivating features

EasyStart
Note: The Pressure Sensor comes activated
with your product. To deactivate the pressure
sensor see 'Activating or deactivating features'.
The Quadpacer is an interval timer that has a
short beep and pause to remind you to brush
the different sections of your mouth.
Depending on the brushing mode you have
selected (see 'Brushing modes'), the
Quadpacer beeps at different intervals during
the brushing cycle.
You can activate or deactivate the following
features of your toothbrush:
- EasyStart
- Brush head replacement reminder
- Pressure sensor
To activate or deactivate these features, follow
the instructions below:
1 Put the handle on the plugged-in charger.
2 Press and hold the power on/off button
while the handle remains on the charger.
3 Keep the power on/off button pressed until
you hear a single short beep (after 3
seconds).
4 Release the power on/off button.